|
 | Heatrae Pack U1 - 95 970 352
For use with Hotflo and Multipoint 10 and 15 litre.Combined Pressure Reducing Valve and Strainer. The Pressure Reducing Valve limits water pressure to 3.5 bar (50 psi). The Strainer filters coarse impurities from the water supply. Where Pack U1 is fitted, it MUST be used with either Pack U5 (Hotflo) or Pack U2 (Multipoint)
Installation Details
List Price £79.08 each excluding VAT
Order Online for: £68.40 (£82.08 Including VAT )
|
|
|
|
Heatrae Pack U2 - 95 970 351
Expansion Vessel, Check Valve, Pressure Relief (Expansion) ValveThe Expansion Vessel, when fully charged, will absorb all expanded water produced by the Multipoint heater during normal operation. The Check Valve prevents backflow of hot water and eliminates any possibility of cross-contamination between cold and hot water. The Expansion Valve, which opens at 6 bar (87 psi), acts as a back-up to the expansion vessel.
Installation Details
List Price £150.48 each excluding VAT
Order Online for: £130.20 (£156.24 Including VAT )
|  |
|
|
|
 | Heatrae Pack U3 - 95 970 354
Thermostatic Blending Valve with Integral Check Valves and Strainers.The Blending Valve allows water to be stored at high temperatures and blended with cold water to a preset outlet temperature. This provides over-temperature protection, and is ideal for the control of Legionella and the extension of system capacities. Complies with BS 1415 part 2.
Features and Installation Details
List Price £131.06 each excluding VAT
Order Online for: £113.40 (£136.08 Including VAT )
|
|
|
|
Heatrae Pack U5 - 95 970 356
Expansion Vessel and Check ValveThe Expansion Vessel, when fully charged, will absorb all expanded water produced by the Hotflo heater during normal operation.The Check Valve prevents backflow of hot water and eliminates any possibility of cross-contamination between cold and hot water.
Installation Details
List Price £112.94 each excluding VAT
Order Online for: £97.70 (£117.24 Including VAT )
|  |
|
|
|
 | Heatrae Pack U6 - 95 970 359
Temperature and Pressure Relief Valve The Temperature and Pressure Relief Valve is recommended by Heatrae Sadia to give an additional level of safety to Hotflo. It is pre-set to open at 7 bar (101.5 psi) and 90ºC. Pack U6 is the only Temperature and Pressure Relief Valve recommended for use with Hotflo Unvented Heaters.
Installation Details
List Price £92.09 each excluding VAT
Order Online for: £81.30 (£97.56 Including VAT )
|
|
|
|
Heatrae Pack U7 - 95 970 360
TMV3 Thermostatic blending valve
List Price £137.45 each excluding VAT
Order Online for: £121.30 (£145.56 Including VAT )
|  |
|
|
|
| Heatrae Hotflo and Multipoint Accessories Pack U! 95 970 352 Pack U2 95 970 351 Pack U3 95 970 354 PackU5 95 970 356 Pack U6 95 970 359 Pack U7 95 970 360 95970352 95970351 95970354 95970356 95970359 95970360 |
|
|
VIEW HEATRAE TAPS ETC..!
|
