Vent Axia T Series Controllers


	Vent Axia T-Series Controllers The T-Series range of fans has several unique benefits. The speed control pack built into the fan enables one of three fan speeds to be set (without a controller) to provide the exact volume of air movement required not only at the time of installation, but subsequently, should conditions or requirements change. Check here for additional Information




TSC T-Series Controller W361119 T-Series 3-speed reversing controller - surface mounting. For use with any size of T-Series ventilating unit only. BEAB approved. Order Online for:£62.30 (£71.65 Including VAT )




	400 Ecotronic Controller W362320 Ecotronic 400 Controller for T-Series. For use with groups of up to 5 units of any size up to a total of 400 watts. Extract - shutter open/fan Off. Intake - On/Off and auto sensor mode. Infinitely variable speed control with 'E' running position, adjustable minimum speed setting. Note: Do not mix T-Series with Standard Range ventilating units on one controller. Order Online for:£104.20 (£119.83 Including VAT )




TTC Timeswitch Controller W361310 Electronic timer. Can be pre-set for a time overrun of 1-35 minutes. Maximum load 2 (1 inductive) amps. Suitable for use with all sizes of both T-Series and Standard Range units. Can also be used on Sensor mode of T-series Controller Order Online for:£67.70 (£77.86 Including VAT )




BOX 400144 Metal box for flush fitting above controllers Order Online for:£6.80 (£7.82 Including VAT )




Humidity Sensor 563550 Ambient Response Humidity Sensor Self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature.Night time RH increment setback feature. Order Online for:£117.90 (£135.59 Including VAT )




	Air Quality Sensor 563506B Activates ventilating units when the air quality declines below an adjustable preset level or when tobacco smoke is detected. When the atmosphere has returned to normal the fan will continue to run for a preset period (adjustable between 1 and 25 minutes) and then switch off. The AQS incorporate a changeover switch to simplify use with auto mode setting, or change from Low to High speed on appropriate two speed fans. BEAB Approved Order Online for:£128.80 (£148.12 Including VAT )




Ecotronic Humidity Sensor 563532 The Ecotronic Humidity Sensor is an adjustable set point, solid state controller. A pullcord provides manual override, indicated by lamp. Adjustable from 65% to 90%RH. Ecotronic includes a relay and can be used with T-Series controller sensor mode. Order Online for:£64.20 (£73.83 Including VAT )




	Thermoswitch 563502B Automatically switches on fans on either a rise or fall in air temperature. The Thermoswitch can be used with all Vent-Axia fans (via switchgear if appropriate) for the removal of warm air from buildings. It can also be used to switch on Hi-Line ceiling fans for summer cooling and to move high level warm air down to the working level during winter. Order Online for:£21.80 (£25.07 Including VAT )




Visionex PIR Detector 459623 A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on 'Auto' setting and ITC controllers on sensor mode. Check here for further information Order Online for:£66.60 (£76.59 Including VAT )