BEHA TP100 Programmer


	BEHA TP100 programmer BEHA heaters are manufactured in Norway where once heaters are turned on in September or October, they are rarely if ever turned off again until April. This is mostly because of the extreme winter temperatures in Norway but also because Norwegians know that the largest cost element in heating can be in raising the room temperature from cold (generally many degrees below zero) to a reasonable comfort level. The TP100 programmer is not an on/off time switch. It is designed to lower the room temperature at those times of the day when a property is likely to be unoccupied without allowing it to get cold. TP 100 can easily be mounted on a P or L heater and comes with three programmes for economical savings. Installed in the heater, it will provide an automatic control of the temperature and help you decrease your electricity bill. This programmable module automatically reduces the room temperature by 5ºC. The reduction will always be decided by the temperature set on the heater.




Programming options... * The most important programme is the night reduction programme which lowers the temperature by 5º C for 7 hours. The 7 hours temperature reduction is suitable for lowering the temperature in the room at night. The adjustment is active for 7 days a week. * The 5-hours programme is used to lower the room temperature by 5ºC when the room is vacant during the day. The programme is active 5 days of the week. * The 15-hours programme is used to lower the room temperature by 5ºC for a continuous period of 15 hours, e.g. from 11 p.m. to 2 p.m. the next day. This can be advantageous for longer periods of absence. The programme is active 5 days of the week, and can be combined with the 7-hour programme * The saved programmes can be overridden by pushing the PAUSE-button. The reduction function will then be cancelled until the PAUSE-button is pressed once more. The programmes will then automatically return to the original setting. An activated setting is indicated by the blinking of the light emitting diode on the appropriate programme. The electronics have a backup reserve of one hour in case of power failure. *View programming example*



	BEHA TP100 Plug-in Module - White Programming Module for BEHA P and L Range White finish to match panel heater range Weight: 0.2kg Recommended Price £39.90 (ex.vat) Order Online for:£33.50 (£39.36 Including VAT )




BEHA TP100B Plug-in Module - Black Programming Module for BEHA P and L Range Black finish to match panel heater range Weight: 0.2kg Recommended Price £43.90 (ex.vat) Order Online for:£33.50 (£39.36 Including VAT )




	BEHA iJaz Controller Wireless Programmer for central control of BEHA Heaters Requires RP200 Receiver Module in each heater * No installation or additional cables required * User friendly with touch screen display * Controls up to 16 zones * Comfort, Set-back, Frost and Off functions * Unlimted number of heaters per zone * Built-in transmitter and receiver * 433MHz, 300m maximum range * Built-in thermometer Further information... Recommended Price £230.00 (ex.vat) Order Online for:£199.50 (£234.41 Including VAT )




BEHA RP200W Receiver Module for iJAZ - White Receiver Module for Beha P and L Range Heaters * Fits all post 2005 'P' and 'L' Series Heaters * Pause button to override program * Comfort, Set-back, Frost and Off functions * Functions indicated by coloured LEDs * Auotmatic 'cold draught' function White finish to match panel heater range Weight: 0.2kg Recommended Price £55.00 (ex.vat) Order Online for:£47.65 (£55.99 Including VAT )




	BEHA RP200B Receiver Module for iJAZ - Black Receiver Module for Beha P and L Range Heaters * Fits all post 2005 'P' and 'L' Series Heaters * Pause button to override program * Comfort, Set-back, Frost and Off functions * Functions indicated by coloured LEDs * Auotmatic 'cold draught' function Black finish to match panel heater range Weight: 0.2kg Recommended Price £55.00 (ex.vat) Order Online for:£47.65 (£55.99 Including VAT )




BEHA TP16 Adaptor Switch for iJAZ - White 16 amp Plug-in Adaptor To control small appliances, lights etc Weight: 0.2kg Recommended Price £55.00 (ex.vat) Order Online for:£47.65 (£55.99 Including VAT )




	13a Convertaplug To connect BEHA heaters directly to a 13a UK Switch Socket BEHA Heaters are supplied fitted with a 2-pin Continental Plug. The usual connection method in the UK is via an adjacent switch spur or 13a socket outlet. Both methods require the installer to remove the plug fitted on the BEHA Heater. Using the Convertaplug adaptor this can be avoided where a 13a socket is the preferred power supply. Price:£4.00 (£4.70 Including VAT )




VIEW AND BUY BEHA PANEL HEATERS ONLINE



BEHA TP100 setback programmer and iJaz wireless controller for BEHA standard and low profile electric panel convector heaters