Claudgen QSC1 Softstart Control
This QSC1 is specifically designed to control the operation of up to 6 kW of Quartz Heaters.
It provides a soft start when initially switching the heaters on, thereby removing the surge normally associated with this type of heater. Cable and switchgear may be selected using the same calculations as for resistive heating loads. This facilitates the use of cheaper and easier to install cable and switchgear.
In order to maximise energy savings the Softstart Driver may be used in conjunction with the PIR1 Heating Control. The PIR1 is wired in place of the plate switch. In this situation the heating can only come on when there is a physical presence in the area, for a selectable time period, and only when the temperature falls below a predetermined level. Again, the PIR1 can control multiple Softstart Drivers.
Dimensions: 200mm(h) x 80mm(d) x 150mm(w) - 350g Features
Eliminates power on surge
6 kW loading capacity
Reduces installation wiring costs
Prolongs Quartz lamp lifeElectric Heating from Consort Claudgen
Electric heating is not only the cleanest form of heating but can be very economical, with products to suit almost any application, that will give years of trouble free operation.
Consort Claudgen's modern production facility in Milford Haven is ISO 9001 Accredited and their high quality, innovative products all conform to the latest European safety standards and carry the CE quality mark.
All products have a 1 Year Warranty which is backed by a nationwide customer care service, offering full spares and field support. A dedicated team of professionals are on hand to give technical guidance and offer free advice on any heating scheme.Click here to view the Commercial Installation Planner and Product Selection Guide