|
 | Heat Mat 7mm Heating Cable
Value for Money
Heat Mat 7mm heating cable is designed as an economic to purchase and install heating solution for new build applications. It can be used beneath virtually any floor covering and is normally installed within a screed bed which then acts as a 'storage radiator'. Installed in this way the system can provide sole source heating in most circumstances.Safe
The 7mm cable is twin-conductor and earth shielded so that, unlike many other suppliers' products, it emits negligible EMF radiation. The cable is protected from stretching by a Kevlar thread and has a heavy-duty outer insulation to prevent damage during the building process.The system should always be laid onto a suitable insulation layer and we recommend Cellotex Double-R or Marmox. Metal fixing bands can be supplied to allow you to attach the cable to the insulation layer and the bands have pre-spaced fixing points allowing the desired wattage output to be easily attained by varying the cable to cable distance. As an alternative the cable can be secured to reinforcement mesh rather than using fixing bands.
|
|
|
|
| More information... When used beneath tiles or stone we would recommend an output of 160W/m2 - 200W/m2 and for use under any other type of covering such as laminate or vinyl an output of 160W/m2 is desirable. If this system is laid beneath a 50-70mm screed at an output of 160W/m2 any floor covering can then be installed on top. This is particularly useful when the final floor covering has not been specified.With the appropriate thermostat the 7mm heating cable can be used outside to provide frost and snow protection allowing compliance with any related health and safety regulations. In these circumstances an output of 270W/m2 is desirable.Where possible, the floor sensor should be installed in a channel on top of the screed base to allow it to control the temperature more accurately.This system is fully VDE approved and CE marked and is guaranteed by a 15 year manufacturer's warranty. * Different Floor Construction Options * How to install your 7mm heating cable * Technical Specification - all you need to know |
|
|
 | 7mm Heating Cable
Twin-conductors comprising one resistance wire and one return wire insulated with silicon rubber. Tinned copper metal shield. Protected from stretching by a fibreglass wire.Designed for new build applications or any other circumstances where a screed is going to be laid.Supplied in indivdual outputs from 210w to 3067w it is normally fitted either to a reinforcement mesh or by the use of Heat Mat metal bands.Manufactured in a BEAB approved factory with a fifteen year warranty. CE Marked.All cables have an output of 20W/m
|
Select heating cable required from the list below...
Prices exclude VAT
|
|
|
|
|
Fixing Band - PRA-111-001
For installing 7mm Heat Mat Heating Cables6 metre Length(Approximately 1m of fixing band required per 6m of cable)
Price:£22.00 (£26.40 Including VAT )
|
|
|
Fixing Band - PRA-111-002
For installing 7mm Heat Mat Heating Cables12 metre Length
Price:£22.00 (£26.40 Including VAT )
|
|
|
|
CPS10 Programmable Thermostat Timer
* Easy to use
* 7 Day programmable thermostat
* IP21 rated
* Extendable floor sensor (100m)
* Backlit display
* Fully adaptive function for increased economy
* Rated: 16A - 3600W
* Flush mounts to a standard UK single gang wall box
More...
Buy Online for: £79.00 (£94.80 Including VAT )
|  |
|
|
|
 | TPS30 Dual Sensor Manual Thermostat
* Easy to use with temperature settings
* Extendable floor sensor (100m)
* IP21 rated
* Rated: 16A - 3600W
* Flush mounts to a standard UK single gang wall box
More...
Buy Online for: £67.00 (£80.40 Including VAT )
|
|
|
|
Heat Mat Cable Safe - ACC-CAB-SAFE
Heat Mat's Cable Safe Monitor is the perfect accessory to ensure peace of mind whilst you are installing your underfloor heating. You simply connect the Live, Neutral and Earth wires of the heating system to the monitor and the Cable Safe will sound an alarm if the heating element is accidentally damaged during installation, giving you the opportunity to repair or replace the system.Cable Safe works with all Heat Mat cable and mat products including the new Underlaminate System and unlike some similar products, the monitor also sounds the alarm if you cut into the insulation around the live or neutral wires even if you have not cut all the way through the cable
Buy online for: £48.00 (£57.60 Including VAT )
|  |
|
|
|
CONTACT OUR SALES OFFICE FOR TRADE & QUANTITY DISCOUNTS
|
