CH103 Zip ChillTap

Installation... The tap should be positioned to the left and rear of a sink The tap should be mounted on a flat surface The tap should be mounted at 45 degrees to the edge of the sink so it drains into the sink when running The under-sink chiller should be located as closely as possible to and directly under the tap The under-sink chiller must be installed with clearances of 50mm left, right, rear and above Filters should be mounted where readily accessible on the chiller or on the adjacent cupboard wall Water connections: 15mm BSP Ventilation: The cupboard containing the under-sink unit must be amply ventilated Installation: To be carried out by a suitably experienced installer with due attention to current regulations