|
These heaters are designed for ceiling mounting. It is not advisable to mount them over desks, counters or high level display racking wherever a constant flow of heated air may be uncomfortable or cause overheating.Mounting brackets are provided for mounting either directly to a standard 600 x 405mm cut-out, the brackets being fixed to the heater and then screwed to the surface of the ceiling. Alternatively fixings can be made through the sides of the unit into a suitable frame. The special aluminium diffuser is then fitted directly to the ceiling.The minimal height of the unit allows it to be fitted within a ceiling void of 250mm.The maximum recommended mounting height is 3.0m.Connection should be made to a suitably fused power supply via the Remote Switch Unit or a 2-pole switched connection unit having a contact separation of at leats 3.0mm in all poles.Access to the connector block is gained by removing the side cover plate (2 screws), connection is then made using cables with 4 cores and earth, with at least one being rated to take the full load current.Electrical installation should be carried out by a suitably qualified or competent person in accordance with current regulations and good practice.
|
