Vent Axia VA100 SELV12 Low Voltage Fan The World's original SELV fan providing extra safety and peace of mind in domestic shower and bathrooms. The VA100 SELV12 from Vent-Axia is a 100mm axial extract fan which can be safely installed over or within reach of a bath or shower in bathrooms and WC's. A range of fans with optional shutter, timer and humidity controlled versions to match application requirements precisely. The VA100 SELV12 meets the Building Regulation requirements of 15 l/s for bathrooms and WC's. Designed in a clean White finish and suitable for ambient temperatures up to +40°C the unit is fitted with Standard Thermal Overload Protection (S.T.O.P.). Saftey Extra Low Voltage Fan (SELV) Designed for areas where a fan has to be fitted over or within zone 1 in a room containing a fixed bath or shower according to IEE wiring regulations (BS 7671), the VA100 SELV fan can be safely installed within the spray area. The fan is rated IPX7. Control is by mains safety isolating IP44 transformer unit with SELV output, which is sited away from any source of spray and out of reach of a person using a fixed bath or shower. Vent-Axia SELV units have been independently tested in accordance with UK and European Safety Extra Low Voltage (SELV) and product requirements, and have as a result been granted BEAB approval based on CENELEC harmonised standards. Panel Model For discharging into ventilation shafts. It can also be used with up to 3 metres of rigid ducting. Performance 75m3/h, FID sound level 31dB(A). Window Model The VA100 window kit is designed to fit VA100 units in windows and fixing surfaces up to 40mm thick. The four spacers supplied are placed on the inside of the glass to give minimum exterior projection. Wall Model The VA100 wall kit is a rigid telescopic wall sleeve for wall thicknesses from 255-360mm thick plus an outside grille set. For thinner walls the sleeves can be cut to fit. Transformer Measures 148 x 87 x 49(d)mm (0.55kg) and requires min 28mm deep PLASTIC two gang mounting box such as MK2142 - DO NOT use a metal mounting box Dimensions Can be installed at any angle. If ceiling mounted a maximum of 3m rigid ducting should be used with a condensation trap. The maximum length of 1.5mm2 cable between transformer and fan is 8 metres. Integral humidistat and timer versions available. Requires fixing hole: 105mm diameter. Suitable for wall, window, panel or ceiling mounting.