|
 | HR100S Single Room Heat Recovery Unit
HR100S is a two speed surface mounted extract and intake single room heat recovery unit that gives up to 60% heat recovery. The HR100S has an extremely quiet trickle ventilation mode and is easy to install. An optional range of sensors are available.Two speed performance: Low 30m³/h and High 75m³/h. Ideal for condensation control of bath and shower rooms, whilst saving the majority of the heat. The unit meets Building Regulation requirements for bathroom use.The model comes complete with a highly efficient, polymeric heat exchanger cube.The compact washable cube interleaves outgoing moist warm air with incoming fresh air and allows the heat from one to warm the other without the two air streams mixing. Up to 60% of the heat that could otherwise be lost is transferred to the incoming air, optimizing energy savings. Energy is saved on room heating with no power being used by the cube itself. Mains voltage units and associated controls must be out of reach of a person using a bath or shower. IP44View Installation and Maintenance Information Check here to view dimensions or here to view catalogue page in pdf format (111kb)
|
|
 |
|
|
HR100S Heat Recovery Unit - 14110010
Two speed,surface mounted extract and intake heat recovery ventilation unit for bathrooms and toilets. 230-240v/1/50Hz Class I earthed applianceMax Extract Performance: 75 m3/h
View Suitable Controllers and Sensors
Order Online for:£172.80 (£203.04 Including VAT )
|  |
|
|
|
|
 | 400mm Extension Sleeve - 400748
Extension Sleeve - 400mm x 100mm dia' plastic split wall sleeve and joining collar
Order Online for:£18.70 (£21.97 Including VAT )
|
|
|
