Vent Axia HR100W Range


	HR100 and HR100WH Single Room Heat Recovery Units The HR100W and HR100WH units feature balanced ventilation with 70% heat recovery and provides control of condensation and odours.The units are through the wall, with a range of control and length options. Effectively controlling internal relative humidity. Fresh pre-warmed air from the outside is continuously provided to the room with simultaneous extraction of stale, moist air. An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the temperature of the fresh air and most importantly reducing the Relative Humidity of the supply air to the room. The HR100W has a two speed motor which provides for constant low rate ventilation automatically switching to boost speed at the factory-set humidity level of approximately 70% relative humidity at 20°C. This level can easily be adjusted by removing the front cover and heat exchanger to reveal the adjustment spindle. The HR100WH is fitted with an integral humidity sensor. View Installation and Maintenance Information Check here to view dimensions or here to view catalogue page in pdf format (156kb)




HR100W Heat Recovery Unit - 370373 Provides balanced ventilation with heat recovery and is suitable for installation in bathrooms and toilets. Max Extract Performance: 77 m3/h View Suitable Controllers and Sensors Order Online for:£105.20 (£120.98 Including VAT )




	HR100WH Heat Recovery Unit - 370375 ...with built in Humdidty Sensor. A surface mounted heat recovery ventilation unitfor use in bathrooms and toilets, meeting building regulations for this application. Order Online for:£141.40 (£162.61 Including VAT )




500mm Extension Sleeve - 370419 Extension Sleeve for walls up to 500mm thick Order Online for:£24.10 (£27.72 Including VAT )




Filter set - 370378 Order Online for:£7.40 (£8.51 Including VAT )