|
 | Vent Axia HR300 Single Room Heat Recovery Unit
The Vent Axia HR300 unit incorporates 2 specially developed mixed flow fans for low noise and efficiency, with up to 70% heat recovery. Effectively lowering internal relative humidity the Vent Axia HR300 unit controls condensation and eliminates mould growth. Designed for through the wall mounting.Fresh, pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale moist air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with no cross contamination, maintaining internal temperatures and providing a fresh environment. The unit is fully controllable for speed using a small dedicated speed controller. Automatic ON/OFF control or switching to boost is easily achieved using sensors/timers e.g. humidistat. For summer operation the heatexchanger can be removed and replaced with a plastic divider board to provide positive cooling to rooms. Available in three speeds: 75, 210 and 300m³/h. It is ideal for light commercial applications including function rooms, offices and classrooms. View Installation Information Check here to view dimensions or here to view catalogue page in pdf format (107kb)
|
|
|
|
Vent-Axia HR300 Commercial Heat Recovery Unit - 370394
Designed to provide balanced ventilation with heat recovery.Ideal for light commercial applications including function rooms, swimming pools, offices, classrooms etcSupplied complete with integral shutter deviceMax Extract Performance: 300 m3/h
View Suitable Controllers and Sensors
Order Online for:£340.00 (£408.00 Including VAT )
|  |
|
|
|
Vent-Axia Extension Sleeve - 370422
Extension Sleeve for walls up to 500mm thick - HR300
Order Online for:£34.00 (£40.80 Including VAT )
|
|
|
|
Vent-Axia Filters - 370402
Filter set for HR300
Order Online for:£5.70 (£6.84 Including VAT )
|
|
|
 | Vent-Axia Electronic 1.5a Controller - W300310
Surface mounting. It will provide infinitely variable speed control and features an On/Off/sensor slider with neon indicator. There is an adjustable minimum speed setting. The controller is radio suppressed to BS EN 55014 and electrical connections for use with suitable external sensors are provided. Dimensions: 86 x 156 x 53mm (H x W x D)
For flush fitting a metal wall box accessory is available:
Hole for wall box: 80 x 150 x 150mm ( H x W x D )
Order Online for:£68.50 (£82.20 Including VAT )
|
|
|
|
Vent-Axia VCON6 Speed Control Switch - 370356
Surface or flush mounted manual speed controller, provides on/off together with low, normal and boost speeds with speed interface. Dimensions: 85 x 145 x 30mm ( H x W x D )
Dimensions: 85 x 145 x 40mm ( H x W x D ): With rotary switch
Order Online for:£43.00 (£51.60 Including VAT )
|  |
|
|
|
 | Installation Accessories...
Follow this link to view and buy any isolating switches, spurs, mounting boxes, cables and other accessories you may require to install your heat recovery unit...
|
|
|
|
VIEW ALL VENT AXIA SINGLE ROOM HEAT RECOVERY UNITS
|
|
|
| Vent-Axia Single Room Heat Recovery Unit HR300 370394 |
