|
 | All about Vort Quadro
Modern, elegant and practical design - Air extraction on four sides of the appliance has enabled an especially attractive design. In addition, the bodywork is entirely made of anti-UV (no yellowing) ABS thermoplastic resin. Design F.Trabucco & Associati.Simple installation and maintenance greatly facilitated. Fitted with the 3 screws supplied, one for safety and two for fastening.More powerful yet quieter thanks to a new design of impeller which gives a significant reduction in noise (third party certified) and power consumption whilst producing an improved airflow.With guaranteed low environmental impact. Recyclable materials have been used and the "Design for Disassembly" technique has been followed (2002/96/EC-WEE)
Check here to view technical specification...
|
|
 |
|
|
Air extraction on four sides...
Quadro can be either ceiling or wall mounted.The air is extracted laterally through an opening concealed beneath the outer cover and drawn from all around the product. Possible dust deposits are invisible from the outside whereas the outer cover remains perfectly clean.An integrally fitted backdraught shutter on the fan prevents return air when the appliance is switched off.The decentralized hole for the air outlet enables installation in any corner (right or left).Quadro can be ducted to any spigot position by simply rotating the rear box of the unit. The grille always remains in the upright position.
Check here for Dimensions
|  |
|
|
|
|
 | Vort Quadro I
A flush mounting version of the Quadro with a flexible design that allows the outlet pipe to be either vertically or horizontally mounted and additional inlet ports to allow air extraction from a second room.* Not suitable for ceiling or panel mounting
Check here to view technical specification (208Kb)
or here to View and Buy Online
|
|
|
