|
 Click Image | BEHA Panel Convector Heaters...
Ideal for fitting around the home as either a full central heating system or as secondary source heating in lounges, hallways, bedrooms, conservatories etc. There is a choice of colours and a large variety of models.The heaters are simple to install and more user friendly than ever. Additional economy can be achieved with the programmer device TP100 or New iJAZ Central Heating Controller.The heaters have an advanced low temperature heating element for improved comfort in your home.Burning dust and associated discolouring is a problem with many types of convector heaters. BEHA panel convector heaters eliminate this problem due to the low surface temperature of the heating element.This is particularly beneficial for those suffering with asthma and allergies.Scroll down for further information or check here to Buy Online |
|
|
|
Why choose BEHA Heaters...
BEHA panel convector heaters come in two heights and eleven different models with four models available in black.There is a choice of how to install the heaters. As a fixed appliance, the usual connection method in the UK is via an adjacent double pole switch or switch spur. Where connection is to be made using a 13a socket outlet a suitably fused 3-pin plug should be fitted. All methods require the installer to remove the 2-pin plug supplied with the heater.The heaters do not need much space. They can be fitted 3 cm from the floor and only require 5 cm above the heater. That means a total height requirement of just 28 cm when installing a low profile heater. They can also be placed in corners, requiring a minimal 2 cm air gap at either end. Check here to view Data Sheet
|  Click Image |
|
|
|
 | Ventilation in the front...
Ventilation in the front brings the heat out into the room. The combination of the low temperature on the heating element and the design and location of its openings reduces the possibility for dust assembling and consequential discolouration
|
|
|
|
Accurate electronic thermostat... BEHA panel heaters are equipped with a sensitive electronic thermostat that has an accuracy of 0.2ºC at 20ºC. This provides a constant temperature in the room.
View optional TP100 Programming Module
|  |
|
|
|
 | Bathrooms and Utility Rooms... BEHA heaters can be installed in a variety of rooms, including bathrooms (within the correct zones), kitchens and utility rooms etc. They are approved by all major approval regulators and have protection class IPX4.BEHA heaters are double insulated. This makes earthing of the heaters unnecessary and provides the extra security needed.
|
|
|
|
Frost Guard... All BEHA panel heaters are equipped with a frost protection function. That means if the thermostat wheel is turned to the snow crystal symbol it will maintain the room at 5ºC room temperature.
|  |
|
|
|
 | Advanced heating elements... BEHA heating elements have aluminium fins with perforations and a large surface area, distributing the heat in an effective way. This is why the average temperature of the element, in the operating phase, is one of lowest on the market. The critical temperature for dust-burning is 225ºC. In a BEHA heater this temperature will occur only for a short period when the heater is switched on in a cold room. After a short while the element temperature will stabilize at 90ºC. Therefore the front panels surface-temperature will be under the prescribed 80ºC. The elements are fitted in special holders that eliminate unwanted noise from the heater. In addition, BEHA heaters have a galvanized back plate which reduces the temperature against the wall. BEHA heaters are approved by Nemko with an international CB test certificate, making them suitable for sale in Europe and most countries of the world.
|
|
|
|
Protective cover and easy cleaning... The heaters have a child-proof cover on the operating panel which can be screwed shut to avoid interference with the controls.For ease of cleaning the heaters tilt forward on the fixing bracket and can easily be removed for decorating purposes.Follow this link to learn more about BEHA ELEKTRO in Norway
|  |
|
|
|
|